2024 New NCP-CI-Azure Dumps - Real Nutanix Exam Questions
Dependable NCP-CI-Azure Exam Dumps to Become Nutanix Certified
NEW QUESTION # 15
Exhibit.
An administrator is trying to create an NC2 cluster in Azure, but does not see the required region in the drop-down list.
Which two steps could the administrator take to resolve this issue? (Choose two.)
- A. Check the NC2 Billingconsole to ensure the region is listed.
- B. Check the list of regions specified under the NC2 organization cloud account.
- C. Check the Azure subscription is created in the correct region.
- D. Ensure that the Azure region is whitelisted for use by Microsoft in the subscription.
Answer: B,D
Explanation:
* Check the list of regions specified under the NC2 organization cloud account:The list of available regions in the NC2 console might be restricted based on the configuration of the cloud account associated with the NC2 organization. Verifying this list ensures that the desired region is included and available for cluster creation.
* Ensure that the Azure region is whitelisted for use by Microsoft in the subscription:Sometimes, specific regions need to be explicitly enabled or whitelisted in the Azure subscription for certain services. This step ensures that the required region is permitted for use within the Azure subscription, allowing the NC2 cluster to be created in that region.
References:
* Azure Subscription and Service Limits Documentation
* Nutanix NC2 Configuration and Setup Guide
NEW QUESTION # 16
An administrator has been asked to create a cluster to support new workloads.
What are the maximum number of nodes supported in an NC2 on Azure environment?
- A. 28 nodes
- B. 14 nodes
- C. 18 nodes
- D. 24 nodes
Answer: C
Explanation:
* NC2 Cluster Node Limit: NC2 on Azure has specific limitations regarding the maximum number of nodes supported in a single cluster.
* Maximum Nodes: According to the current NC2 on Azure guidelines, a single cluster can support up to
18 nodes.
* Workload Support: This limitation ensures optimal performance and management of resources within the Azure environment.
* Comparison of Options:
* 14 nodes: Less than the maximum supported.
* 24 nodes and 28 nodes: Exceed the maximum supported, potentially leading to performance and management issues.
* Conclusion: For supporting new workloads, the maximum number of nodes in an NC2 on Azure environment is 18.
References:
* Nutanix Clusters on Azure Technical Specifications
* Azure Virtual Machine Scale Sets Documentation
NEW QUESTION # 17
An administrator is planning on building the network prior to deploying a Nutanix cluster into Azure.
Which two components require their own vNets for NC2 in Azure? (Choose two.)
- A. Prism Central
- B. Azure Load Balancer
- C. Virtual Network Gateway
- D. Bare-metal instance
Answer: A,D
Explanation:
* NC2 on Azure Deployment: Deploying Nutanix clusters in Azure involves configuring various components, each needing appropriate network isolation and configuration.
* Components and vNets:
* Bare-metal instance: Requires its own vNet to ensure proper network isolation and performance.
* Prism Central: Needs a dedicated vNet to manage and monitor the Nutanix environment, ensuring it has the required network access and isolation.
* Azure Load Balancer: Does not require its own vNet but needs to be associated with the appropriate vNet where services are deployed.
* Virtual Network Gateway: Is used for VPN connections but does not necessitate a separate vNet; it operates within an existing vNet.
* Network Isolation: Providing separate vNets for Bare-metal instances and Prism Central ensures optimal performance and management capabilities.
* Conclusion: Both Bare-metal instances and Prism Central require their own vNets in the NC2 on Azure deployment.
References:
* Nutanix Clusters on Azure Deployment Guide
* Azure Virtual Network Documentation
NEW QUESTION # 18
Which address must Azure Directory Service be able to resolve when deploying a new NC2 cluster?
- A. Gateway-internal-api-cloud.nutanix.com
- B. Gateway-external-api.cloud.nutanix.com
- C. Apikeys.nutanix.com
- D. Download.cloud.nutanix.com
Answer: B
Explanation:
* Azure Directory Service Role: Azure Directory Service must be able to resolve specific Nutanix URLs to ensure proper communication and functionality during the deployment of an NC2 cluster.
* Critical Endpoint: The address "Gateway-external-api.cloud.nutanix.com" is critical for establishing external API communications required for the deployment and management of the NC2 cluster.
* DNS Resolution: Proper DNS resolution of this address ensures that the Azure Directory Service can interact with Nutanix services and APIs necessary for cluster operations.
* Verification Process:
* Ensure that DNS settings allow resolution of "Gateway-external-api.cloud.nutanix.com".
* Test connectivity and resolution prior to deployment to avoid issues.
* Importance: Without resolving this address, the deployment process might face connectivity issues, leading to potential deployment failures.
References:
* Nutanix NC2 on Azure Setup Guide
* Azure Active Directory Integration
NEW QUESTION # 19
An administrator is planning to expand an NC2 on Azure cluster.
Which statement is true regarding prerequisites for expanding the cluster?
- A. Cluster must be in a Cluster Connected state.
- B. Cluster must have at least five nodes.
- C. Cluster must be in a Cluster Stopped state.
- D. Cluster must have at least three nodes.
Answer: A
Explanation:
* Cluster State Requirement: To expand a cluster, it must be operational and in a connected state to ensure seamless integration of additional nodes.
* Cluster Stopped State: If the cluster is stopped, it cannot perform expansion operations.
* Minimum Nodes Requirement: There is no minimum node count prerequisite for expanding the cluster as long as the cluster is connected.
* Cluster Connected State: Ensuring the cluster is connected verifies that it is operational and can communicate with additional nodes being added.
* Conclusion: The cluster must be in a Cluster Connected state to expand successfully.
References:
* Nutanix Clusters Expansion Guide
* Azure NC2 Configuration Documentation
NEW QUESTION # 20
An administrator has been tasked with ensuring NC2 VMs are able to access Azure and on-premises resources.
The NC2 VM traffic must not traverse the internet.
How can the administrator achieve this?
- A. By using an SSH connection
- B. By using a Site-to-Site VPN
- C. By using ExpressRoute
- D. By using an Interface Endpoint
Answer: C
Explanation:
* Requirement Analysis: The NC2 VMs need to access Azure and on-premises resources without traversing the internet, ensuring secure and direct connectivity.
* Solution Options:
* SSH Connection: Suitable for individual remote access, not for full VM connectivity to Azure and on-premises resources.
* Interface Endpoint: Facilitates private connectivity to specific Azure services, but not comprehensive for all resources.
* ExpressRoute: Provides private, dedicated connectivity between Azure and on-premises environments. This ensures that traffic does not traverse the public internet, meeting the security and performance requirements.
* Site-to-Site VPN: Provides secure connectivity but can involve traversing the internet, which is against the requirements.
* Conclusion: ExpressRoute is the optimal solution as it offers a private connection that does not involve internet traversal, ensuring secure and efficient access to both Azure and on-premises resources.
References:
* Azure ExpressRoute Documentation
* Nutanix Clusters on Azure Networking Guide
NEW QUESTION # 21
When configuring permissions for an Azure subscription, which role is required to delegate minimum permissions for the Azure AD App registration?
- A. Azure Reader role
- B. Azure user Access Administrator role
- C. Azure Custom role defined by Nutanix
- D. Azure Contributor role
Answer: B
Explanation:
* Azure AD App Registration: When setting up an application registration in Azure AD, specific permissions are required to delegate access.
* User Access Administrator Role: This role has the necessary permissions to manage user access to
* Azure resources, including delegating permissions for app registrations.
* Comparison of Roles:
* Azure Reader Role: Grants read-only access, insufficient for managing app registrations.
* Azure Contributor Role: Allows creation and management of resources but does not include permissions to manage access.
* Azure Custom Role: While it can be defined to meet specific needs, the User Access Administrator role is predefined to handle access delegation.
* Conclusion: The Azure User Access Administrator role is required to delegate minimum permissions for Azure AD App registration.
References:
* Azure Role-Based Access Control Documentation
* Azure AD App Registration Guide
NEW QUESTION # 22
An administrator is trying to determine which type of DNS server to deploy for a networking infrastructure in Azure.
Which DNS server option would require either VPN or ExpressRoute connectivity?
- A. Google
- B. On-premises
- C. Cloudflare
- D. Azure
Answer: B
Explanation:
* DNS Server Options:
* Cloudflare: A public DNS service that operates over the internet.
* Azure: Azure DNS operates within the Azure cloud and does not require VPN or ExpressRoute for connectivity within Azure.
* On-premises: Requires a secure connection, such as VPN or ExpressRoute, to be accessible from Azure, as it resides outside the Azure cloud.
* Google: Another public DNS service accessible over the internet.
* Connectivity Requirements:
* On-premises DNS: To integrate on-premises DNS with Azure, secure connectivity (VPN or ExpressRoute) is necessary to ensure seamless and secure communication between the on-premises infrastructure and Azure resources.
* Conclusion: An on-premises DNS server would require VPN or ExpressRoute connectivity to be accessible and integrated with the Azure environment.
References:
* Azure DNS Overview
* VPN Gateway Configuration
* ExpressRoute Overview
NEW QUESTION # 23
A company is extending asubnet from their on-premises environment to an NC2cluster on Azure. The company is considering using either a Virtual Tunnel End Point (VTEP) or a layer 2 subnet Extension over VPN.
In which two scenarios would it be advantageous to use VTEP for this requirement? (Choose two.)
- A. Multiple remote Availability Zones exist to add to the same VTEP-based extended Layer 2 subnet.
- B. Only one remote Availability Zone exists that needs the subnet extended.
- C. Connectivity between sites already does not provided encryption.
- D. Connectivity between sites already provides encryption.
Answer: A,D
Explanation:
* Scenario Analysis:
* A. Connectivity between sites already provides encryption: Using VTEP in this scenario is advantageous because VTEP does not inherently provide encryption. If encryption is already provided, VTEP can be effectively used without additional security concerns.
* D. Multiple remote Availability Zones exist to add to the same VTEP-based extended Layer 2 subnet: VTEP is well-suited for scenarios where multiple remote Availability Zones need to be connected to the same extended Layer 2 subnet. This allows for efficient management and seamless connectivity across different zones.
* Scenarios B and C:
* B. Only one remote Availability Zone exists that needs the subnet extended: This scenario does
* not leverage the strengths of VTEP, as it is better suited for multiple zones.
* C. Connectivity between sites already does not provide encryption: Using VTEP without existing encryption is not ideal as VTEP itself does not encrypt the traffic.
* Conclusion: VTEP is advantageous when encryption is already in place and when multiple remote zones need to be connected to the same extended subnet.
References:
* Nutanix NC2 Networking Guide
* Azure Networking Documentation
NEW QUESTION # 24
After creating a new Nutanix User VPC, what is needed to allow traffic to flow out of the Flow gateway VM when using the NATed Path?
- A. Edit the External Flow Gateway Security Group on the External NIC to allow outbound traffic.
- B. Add a default route on the Nutanix User VPC of 0.0.0.0/0 to the External Overlay network.
- C. Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.
- D. Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.
- E. Edit the Internal Flow Gateway Security Group on the internal NIC to allow outbound taffic
Answer: B
NEW QUESTION # 25
An administrator is tasked to identify the firewall requirement and submit the port request to the requirement team before the clusters deployment.
Which requirement should the administrator ensure is implement on the corporate firewall?
- A. Allow uni-directional internet Control Message Protocol (ICMP) traffic between the CVMs, femenr and Prism Central.
- B. Allow bi-directional Internet Control Message Protocol (ICMP) traffic between the CVMs, Prism Element, and Prism Central.
- C. ICMP and connectivity can be disabled between the CVMs, Prism Element, and Prism Central
- D. ICMP can disable but the connectivity should be enabled between the CVMs. Prism Element, and Prism Central.
Answer: B
Explanation:
* ICMP Traffic:ICMP is essential for network diagnostics and troubleshooting, such as ping and traceroute, which help in monitoring the connectivity and health of the network.
* Bi-Directional Traffic:Allowing bi-directional ICMP traffic ensures that all nodes (CVMs, Prism Element, and Prism Central) can both send and receive diagnostic messages, which is crucial for maintaining proper communication and network stability.
References:
* Nutanix Networking and Connectivity Requirements
* Corporate Firewall Configuration Guidelines
NEW QUESTION # 26
Which two options are prerequisites for deploying an NC2 cloud cluster in Azure? (Choose two.)
- A. A my.nutanix.com account
- B. An on Premises Prism Central environment
- C. A valid CIDR range
- D. An Azure Express Route circuit
Answer: A,C
Explanation:
* Valid CIDR Range:When deploying an NC2 cloud cluster in Azure, a valid CIDR range is necessary to define the IP address space for the cluster and its associated networks. This range ensures that there are no conflicts with existing network configurations and provides sufficient addresses for the cluster resources.
* My Nutanix Account:A my.nutanix.com account is required to access Nutanix services and manage NC2 deployments. This account allows administrators to log in, configure settings, and manage their Nutanix environment on Azure.
References:
* Nutanix NC2 on Azure Deployment Guide
* Azure Virtual Network Documentation
NEW QUESTION # 27
An on-premises network has been extended to azure with a VPN/ExpressRoute. The routing and peering of VNets is setup and has been confirmed to be correct.
Which statement best describes the state of the traffic flow between the on-prem CVMs and the NC2 CVMs in Azure?
- A. The Network Security Group of the Flow Gateway VM on the Internal NICs will need to be edited to enable the traffic flow.
- B. A ticket will need to be put in with Microsoft support to open the subnet ranges from on-premises.
- C. Traffic will flow directly to the NC2 CVMs. Nothing will block the path by default.
- D. The Network Security Group of the Flow Gateway VM on the Externa! NICs will need to be edited to enable the traffic flow.
Answer: A
Explanation:
* Network Security Groups (NSGs):NSGs control the inbound and outbound traffic to and from Azure resources. For traffic between on-premises CVMs and NC2 CVMs in Azure, the NSGs associated with the Flow Gateway VM's Internal NICs must be configured to allow the required traffic.
* Editing NSGs:To enable traffic flow, specific rules must be added to the NSGs to permit traffic from the on-premises network to the NC2 environment. Thisincludes specifying the appropriate source and destination IP ranges and the necessary ports and protocols.
References:
* Azure Network Security Groups Documentation
* Nutanix NC2 Networking Configuration Guide
NEW QUESTION # 28
A nutanix User VPC named Servers has a subnet named Tier1:
Servers: 10.0.0.0/20
Tier1: 10.0.0.0/25
Tier is using floating IPS to allow inbound traffic to the web servers that are hosted for a payroll system.
The company requires that the Network Security Group allow other Native Azure instances running in subnet AD (10.20.0.0/24) in the Prism Central VNet to be able to contact the web servers.
Which statement is true regarding this company requirement?
- A. The external NIC of the Flow Gateway Network Security Group needs to allow traffic from
10.20.0,0/24. - B. The internal NIC of the Flow Gateway Network Security Group needs to allow to traffic from 1
10.20.0.0/24. - C. Policy based routing in the Servers VPC must be edited to allow traffic from 10.20.0.0/24.
- D. Native Azure instances \n the Prism Central vNet will be allowed access by default.
Answer: B
Explanation:
* Flow Gateway Network Security Group (NSG):NSGs control the traffic flow to and from network interfaces associated with VMs and other resources. Configuring the NSG correctly is crucial for ensuring that required traffic is allowed.
* Internal NIC Configuration:To allow Native Azure instances in the Prism Central VNet (10.20.0.0/24) to access the web servers in the Tier1 subnet, the internal NIC of the Flow Gateway must be configured to allow traffic from 10.20.0.0/24. This ensures that inbound traffic from these instances is permitted and properly routed to the web servers.
References:
* Azure Network Security Group Documentation
* Nutanix Flow Gateway Configuration Guide
NEW QUESTION # 29
An administrator is deploying a new cluster on Azure and would like to ensure the data is encrypted. Due to cost constraints the deployment will leverage the native local key manager (LKM).
What is the minimal number of nodes needed to support the Nutanix native LKM?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
* Local Key Manager (LKM):The native local key manager in Nutanix requires a minimum number of nodes to function correctly and provide key management services.
* Minimum Node Requirement for LKM:To support the Nutanix native LKM, at least three nodes are needed. This configuration ensures that the key management service can achieve the necessary quorum and redundancy for secure operations.
References:
* Nutanix Data Encryption Documentation
* Nutanix Cluster Configuration Guide
NEW QUESTION # 30
An administrator needs to attach a network interface to a Flow Gateway VM.
What option should be enabled in the Azure portal and in the OS of the Flow gateway VM to meet this network requirement?
- A. Dynamic Route
- B. Port Tagging
- C. Static Route
- D. IP Forwarding
Answer: D
Explanation:
* IP Forwarding in Azure:Enabling IP forwarding allows the VM to forward network traffic that is not specifically addressed to itself. This is necessary for network devices like the Flow Gateway VM to route traffic correctly.
* Network Interface Configuration:Both the Azure portal settings and the VM's operating system must
* have IP forwarding enabled to ensure proper traffic handling and routing capabilities.
References:
* Azure Virtual Machine Networking Documentation
* Nutanix Flow Gateway Configuration Guide
NEW QUESTION # 31
Which interface must be used to deploy NC2?
- A. NC2 Tile within the my.nutanix.com portal
- B. Cloud Provider portal
- C. Foundation running in a Cloud Virtual Machine
- D. Prism Central Dashboard
Answer: A
Explanation:
* my.nutanix.com Portal:This portal provides access to various Nutanix services and features, including the NC2 deployment interface.
* NC2 Tile:The NC2 tile within the portal is specifically designed for deploying and managing Nutanix Cloud Clusters. It provides the necessary tools and settings to initiate and configure NC2 clusters on Azure or other cloud environments.
References:
* Nutanix NC2 Deployment Guide
* my.nutanix.com Portal Documentation
NEW QUESTION # 32
An organization want to use existing Azure resources to deploy NC2.
What is a valid requirement to use existing Azure resources for this task?
- A. Azure NAT gateway must be attached to the cluster management Prism Central, and external Flow Gateway subnets.
- B. A new Azure resource group must be created where all resources, such as VNets must be created.
- C. More than two DNS servers must be used.
- D. The fastpathenabled tag must be added after creating a NAT gateway.
Answer: B
Explanation:
* Resource Group Requirement:When deploying NC2 on Azure, it is essential to organize resources such as VNets, subnets, and other components in a dedicated resource group. This helps in managing and maintaining the resources efficiently.
* New Resource Group:Creating a new Azure resource group ensures that all the necessary NC2 resources are isolated and managed together, avoiding conflicts with existing resources and providing a clear separation for administration and billing purposes.
References:
* Azure Resource Group Documentation
* Nutanix NC2 Deployment Guide
NEW QUESTION # 33
An administrator ran into an issue during an NC2 cluster deployment on Azure. The administrator has logged a case with Nutanix Support.
Support has requested the following logs from NC2 on Azure in order to diagnose the deployment issue:
* Cluster_agent
* Host_agent
* Hostsetup
What action should the administrator take to ensure the collect the appropriate logs?
- A. Login to Prism Element to access the CVM's console and run the logbay collect command.
- B. SSH to the PCVM and use the logbay collect command.
- C. SSH to the CVM and use the logbay collect command.
- D. Login to Prism Element Web Console to generate a Logbay bundle.
Answer: A
Explanation:
To collect the appropriate logs (Cluster_agent, Host_agent, and Hostsetup) for diagnosing the deployment issue with Nutanix Support, the administrator should:
* Log in to Prism Element to access the Controller VM (CVM) console.
* Run thelogbay collectcommand from the CVM console. This command collects the necessary logs and packages them for support.
This method ensures that the correct logs are gathered in a format that Nutanix Support can analyze.
References
* Nutanix Support Documentation on Log Collection
NEW QUESTION # 34
A company wants to start using Nutanix Cloud Clusters (NC2) in Azure. The company has large spend commitments as part of a Microsoft Azure Consumption Commitment (MACC) totaling $15 million.
What approach should the administrator take to ensure the Nutanix licensing costs apply to the MACC?
- A. Request a trial directly from Nutanix.
- B. Leverage existing Nutanix licenses
- C. Purchase Nutanix licenses through the Azure Marketplace.
- D. Purchase Nutanix licenses directly from Nutanix and contact Microsoft support.
Answer: C
NEW QUESTION # 35
An administrator needs to configure the correct outbound requirement for a successful cluster deployment in Azure.
Which destination must have an outbound rule to meet this requirement?
- A. https://nutanix.dev/*
- B. Https://downloads.cloud.nutanix.com/*
- C. Https://support.nutanix.com/*
- D. Https://portal.nutanix.com/*
Answer: B
Explanation:
* Outbound Rule Necessity: For successful cluster deployment, certain outbound connections must be allowed to ensure proper download and configuration of resources.
* Critical Destination: "Https://downloads.cloud.nutanix.com/*" is a critical endpoint from which the Nutanix software and updates are downloaded during the cluster deployment process.
* Functionality: Ensuring an outbound rule for this destination allows the deployment to fetch necessary files and updates, enabling smooth cluster setup and operation.
* Other Destinations:
* Https://portal.nutanix.com/: Used for accessing the Nutanix portal, not directly related to deployment downloads.
* Https://support.nutanix.com/: Used for support-related tasks, not for deployment-specific downloads.
* https://nutanix.dev/: Related to development and API documentation, not necessary for initial deployment.
* Conclusion: Outbound connectivity to "Https://downloads.cloud.nutanix.com/*" is essential for downloading deployment resources.
References:
* Nutanix NC2 on Azure Network Configuration Guide
* Azure Network Security Documentation
NEW QUESTION # 36
An organization wants to use a Jump Host to access Prism Element and Prism Central within an NC2 cluster on Azure.
Which statement is true?
- A. Jump Host must not be used. Only VPN or ExpressRoute should be use.
- B. Jump Host instance can only be deployed in the Prism Central VNet.
- C. Jump Host instance must be deployed in the cluster VNet.
- D. Jump Host instance can be deployed in the Prism Central VNet or an external VNet.
Answer: D
Explanation:
* Jump Host Deployment:A Jump Host is a secure server used to access other systems in a network. In the context of an NC2 cluster on Azure, it serves as an intermediary for accessing Prism Element and Prism Central.
* Flexible Deployment Options:The Jump Host can be deployed in either the Prism Central VNet or an external VNet, providing flexibility in network design and access strategies. This allows the organization to choose the most suitable network for deploying the Jump Host based on their security and connectivity requirements.
References:
* Nutanix NC2 on Azure Deployment Guide
* Azure Virtual Network Configuration Documentation
NEW QUESTION # 37
An administrator needs to extend an on-premises subnet to an NC2 cluster on Azure.
Which set of options should the administrator configure to complete this task?
- A. Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv6 umcasi traffic and ARP On-premises Hypervisor: Hyper-V
- B. Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic IPv6 unicast traffic and ARP On-premises Hypervisor: ESXi and AHV
- C. Subnet Type: VPC subnets
Traffic Type: IPv4 unicast traffic and ARP
On-premises Hypervisor: ESXi, AHV, Hyper-V - D. Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic and ARP On-premises Hypervisor: AHV
Answer: B
Explanation:
To extend an on-premises subnet to an NC2 cluster on Azure, the administrator should configure:
* Subnet Type:Both on-premises VLAN subnets and VPC subnets. This ensures that the subnet can span both the on-premises environment and the Azure environment.
* Traffic Type:Support for IPv4 unicast traffic, IPv6 unicast traffic, and ARP is necessary to ensure
* proper communication and address resolution across the extended subnet.
* On-premises Hypervisor:ESXi and AHV are supported hypervisors for this type of configuration, allowing for a seamless extension of the subnet between these environments.
References
* Nutanix Hybrid Cloud Networking
NEW QUESTION # 38
An administrator is planning an NC2 deployment in Azure and wants to connect the company's on-premises datacenter to the cloud environment.
What connectivity solution should the administrator use to avoid traffic between the locations flowing over the public internet?
- A. Point-to-Site VPN
- B. ExpressRoute
- C. Site-to-Site VPN
- D. VTEP Gateways
Answer: B
Explanation:
To connect the company's on-premises datacenter to the Azure cloud environment while avoiding traffic over the public internet, the administrator should use Azure ExpressRoute. ExpressRoute provides a private connection to Azure, offering more reliability, faster speeds, and lower latencies compared to typical internet connections. This service ensures that data traffic does not traverse the public internet, enhancing security and performance.References
* Azure ExpressRoute Overview
NEW QUESTION # 39
......
Get Ready with NCP-CI-Azure Exam Dumps (2024): https://troytec.itpassleader.com/Nutanix/NCP-CI-Azure-dumps-pass-exam.html