Fortinet Certified Professional Security Operations FCP_FSM_AN-7.2 Dumps Full Questions with Free PDF Questions to Pass
100% Updated Fortinet FCP_FSM_AN-7.2 Enterprise PDF Dumps
NEW QUESTION # 13
What can you use to send data to FortiSIEM for user and entity behavior analytics (UEBA)?
- A. FortiSIEM worker
- B. SNMP
- C. FortiSIEM agent
- D. SSH
Answer: C
Explanation:
The FortiSIEM agent can be used to send detailed endpoint data such as user activity and process behavior to FortiSIEM, which is essential for performing User and Entity Behavior Analytics (UEBA).
NEW QUESTION # 14
Refer to the exhibit.
What will happen when a device being analyzed by the machine learning configuration shown in the exhibit has a consistently high memory utilization?
- A. FortiSIEM will update the model with a higher memory utilization average value.
- B. FortiSIEM will update the regression tables for memory utilization, and average sent and received bytes.
- C. FortiSIEM will trigger an incident for high memory utilization.
- D. FortiSIEM will lower the CPU utilization trigger requirement for CPU utilization.
Answer: A
Explanation:
In the configuration shown, FortiSIEM uses Memory Util, Sent Bytes, and Received Bytes as input features to predict CPU Utilization via a regression model. If a device shows consistently high memory utilization, the model will incorporate that into its training data and update itself with a higher average value for memory utilization, influencing future CPU utilization predictions.
NEW QUESTION # 15
Refer to the exhibit. If you group the events by Reporting Device, Reporting IP, and Application Category, how many results will FortiSIEM display?
- A. Five
- B. Four
- C. One
- D. Six
- E. Two
Answer: A
Explanation:
Grouping by Reporting Device, Reporting IP, and Application Category yields five unique tuples:
(FW01, 10.1.1.1, DB), (FW02, 10.1.1.2, WebApp), (FW01, 10.1.1.1, SSH), (FW03, 10.1.1.3, DB), and (FW04, 10.1.1.4, SSH).
NEW QUESTION # 16
Refer to the exhibit.
If a rule containing the automation policy shown in the exhibit triggers, what will happen?
- A. Associated source IP addresses will be blocked on devices in the Network CMDB group.
- B. Associated source IP addresses will be blocked on all FortiGate firewalls.
- C. Associated source IP addresses will be blocked on devices in the Aviation organization.
- D. Associated source IP addresses will be blocked on two FortiGate firewalls.
Answer: D
Explanation:
The automation policy is configured to run a remediation script named "Fortinet FortiOS - Block Source IP FortiOS via API". It specifies enforcement on two FortiGate devices: FortiGate508 and FortiGate90D. Therefore, associated source IP addresses will be blocked on those two FortiGate firewalls only.
NEW QUESTION # 17
Refer to the exhibit.
Which two conditions will match this rule and subpatterns? (Choose two.)
- A. A user connects to the wrong IP address for an RDP session five times.
- B. A user fails twice to log in when connecting through RDP.
- C. A user using RDP over SSL VPN fails to log in to an application five times.
- D. A user runs a brute force password cracker against an RDP server.
Answer: C,D
Explanation:
The user initiates an RDP session (Subpattern 1) and then fails to log in multiple times (Subpattern 2 with COUNT(Matched Events) >= 3) - both from the same Source IP and User within 300 seconds.
The brute force attempts typically involve a successful RDP connection followed by multiple failed logins, satisfying the sequence and grouping conditions in the rule.
NEW QUESTION # 18
Refer to the exhibit.
What is the Group: FortiSIEM Analysts value referring to?
- A. CMDB user group
- B. LDAP user group
- C. FortiSIEM organization group
- D. Windows Active Directory user group
Answer: A
Explanation:
In FortiSIEM, the value Group: FortiSIEM Analysts under the User attribute refers to a CMDB user group. These groups are defined within FortiSIEM's CMDB and used to logically organize users for analytics, correlation rules, and reporting.
NEW QUESTION # 19
Refer to the exhibit.
Which section contains the subpattern configuration that determines how many matching events are needed to trigger the rule?
- A. Filters
- B. Actions
- C. Aggregate
- D. Group By
Answer: C
Explanation:
The Aggregate section contains the condition COUNT(Matched Events) >= 1, which defines how many events must match the filter criteria for the rule to trigger. This is the subpattern configuration that determines the event threshold.
NEW QUESTION # 20
Refer to the exhibit.
An analyst wants the rule shown in the exhibit to trigger when three failed login attempts occur within three minutes.
What should the values be for the condition time window and aggregate count?
- A. Time window 90 seconds, aggregate count 3
- B. Time window 180 seconds, aggregate count 2
- C. Time window 180 seconds, aggregate count 3
- D. Time window 90 seconds, aggregate count 2
Answer: C
Explanation:
To detect three failed login attempts within three minutes, you must set the aggregate count to 3 in the subpattern and the time window to 180 seconds in the rule condition. This ensures the rule triggers only if three or more failed logins occur in that timeframe.
NEW QUESTION # 21
Refer to the exhibit.
An analyst wants the rule shown in the exhibit to trigger when three failed login attempts occur within three minutes.
What should the values be for the condition time window and aggregate count?
- A. Time window 90 seconds, aggregate count 3
- B. Time window 180 seconds, aggregate count 2
- C. Time window 180 seconds, aggregate count 3
- D. Time window 90 seconds, aggregate count 2
Answer: C
Explanation:
To detect three failed login attempts within three minutes, you must set the aggregate count to 3 in the subpattern and the time window to 180 seconds in the rule condition. This ensures the rule triggers only if three or more failed logins occur in that timeframe.
NEW QUESTION # 22
How does FortiSIEM update the incident table if a performance rule triggers repeatedly?
- A. FortiSIEM changes the incident status to Repeated, and updates the Last Seen timestamp.
- B. FortiSIEM generates a new incident based on the Rule Frequency value, and updates the First Seen and Last Seen timestamps.
- C. FortiSIEM updates the Incident Count value and Last Seen timestamp.
- D. FortiSIEM generates a new incident each time the rule triggers, and updates the First Seen and Last Seen timestamps.
Answer: C
Explanation:
When a performance rule triggers repeatedly, FortiSIEM updates the existing incident by incrementing the Incident Count and refreshing the Last Seen timestamp. This avoids flooding the incident table with duplicates while still tracking repeated occurrences.
NEW QUESTION # 23
Refer to the exhibit.
If you group the events by User, Source IP, and Count attributes, how many results will FortiSIEM display?
- A. Four
- B. Five
- C. Two
- D. Three
- E. Six
Answer: E
Explanation:
Grouping by User, Source IP, and Count means that each unique combination of those three attributes will be treated as a separate result. In the table, all six rows have distinct combinations of User, Source IP, and Count - so FortiSIEM will display 6 results.
NEW QUESTION # 24
Which information can FortiSIEM retrieve from FortiClient EMS through an API connection?
- A. ZTNA tags
- B. FortiSIEM license
- C. Host software versions
- D. Host login credentials
Answer: A
Explanation:
FortiSIEM can retrieve ZTNA tags from FortiClient EMS through an API connection, enabling dynamic user and device classification for policy enforcement and incident response.
NEW QUESTION # 25
Refer to the exhibit.
Which two conditions will match this rule and subpatterns? (Choose two.)
- A. A user connects to the wrong IP address for an RDP session five times.
- B. A user fails twice to log in when connecting through RDP.
- C. A user using RDP over SSL VPN fails to log in to an application five times.
- D. A user runs a brute force password cracker against an RDP server.
Answer: C,D
Explanation:
The user initiates an RDP session (Subpattern 1) and then fails to log in multiple times (Subpattern 2 with COUNT(Matched Events) >= 3) - both from the same Source IP and User within 300 seconds.
The brute force attempts typically involve a successful RDP connection followed by multiple failed logins, satisfying the sequence and grouping conditions in the rule.
NEW QUESTION # 26
Refer to the exhibit.
What happens when an analyst clears an incident generated by a rule containing the automation policy shown in the exhibit?
- A. A notification is sent to the SOC manager dashboard.
- B. An email is sent to the SOC manager.
- C. The remediation script is run.
- D. No notification is sent.
Answer: D
Explanation:
The automation policy has the option "Do not notify when an incident is cleared manually" enabled. Therefore, when an analyst manually clears an incident, no notification or automation action is triggered.
NEW QUESTION # 27
Refer to the exhibit.
If a rule containing the automation policy shown in the exhibit triggers, what will happen?
- A. Associated source IP addresses will be blocked on devices in the Network CMDB group.
- B. Associated source IP addresses will be blocked on all FortiGate firewalls.
- C. Associated source IP addresses will be blocked on devices in the Aviation organization.
- D. Associated source IP addresses will be blocked on two FortiGate firewalls.
Answer: D
Explanation:
The automation policy is configured to run a remediation script named "Fortinet FortiOS - Block Source IP FortiOS via API". It specifies enforcement on two FortiGate devices: FortiGate508 and FortiGate90D. Therefore, associated source IP addresses will be blocked on those two FortiGate firewalls only.
NEW QUESTION # 28
Refer to the exhibit.
According to the automation policy configuration shown in the exhibit, what happens if an associated rule triggers?
- A. FortiSIEM fails to the integration policy, because no policy is defined.
- B. FortiSIEM performs all selected actions.
- C. FortiSIEM sends an email, because that is first on the list.
- D. FortiSIEM runs the remediation script, because that takes precedence over all other options.
Answer: B
Explanation:
When an associated rule triggers, FortiSIEM performs all selected actions in the automation policy. In this case, it will send an email/SMS/webhook, run the remediation script, invoke the integration policy (even if none is currently defined), and create a case. All checked actions are executed.
NEW QUESTION # 29
Refer to the exhibit.
According to the automation policy configuration shown in the exhibit, what happens if an associated rule triggers?
- A. FortiSIEM fails to the integration policy, because no policy is defined.
- B. FortiSIEM performs all selected actions.
- C. FortiSIEM sends an email, because that is first on the list.
- D. FortiSIEM runs the remediation script, because that takes precedence over all other options.
Answer: B
Explanation:
When an associated rule triggers, FortiSIEM performs all selected actions in the automation policy. In this case, it will send an email/SMS/webhook, run the remediation script, invoke the integration policy (even if none is currently defined), and create a case. All checked actions are executed.
NEW QUESTION # 30
Refer to the exhibit.
As shown in the exhibit, why are some of the fields highlighted in red?
- A. The attribute COUNT(Matched Events) is an invalid expression.
- B. No RAW Event Log attribute information is available.
- C. Unique values cannot be grouped B.
- D. The Event Receive Time attribute is not available for logs.
Answer: C
Explanation:
The fields are highlighted in red because unique values such as Event Receive Time and Raw Event Log cannot be used in group-by operations. Grouping requires aggregatable or consistent values across events, while these fields are unique to each event, making them incompatible for grouping.
NEW QUESTION # 31
When configuring anomaly detection machine learning, in which step must you select the fields to analyze?
- A. Prepare Data
- B. Schedule
- C. Design
- D. Train
Answer: A
Explanation:
In the Prepare Data step of configuring anomaly detection in FortiSIEM, you must select the fields to analyze. This step defines the input features that the machine learning model will evaluate during training and detection.
NEW QUESTION # 32
Which analytics search can be used to apply a user and entity behavior analytics (UEBA) tag to an event for a failed login by the user JSmith?
- A. User = smith
- B. Username NOT END WITH jsmith
- C. Username CONTAIN smit
- D. User IS jsmith
Answer: D
Explanation:
The correct syntax to match an exact username in FortiSIEM analytics search is User IS jsmith. This ensures that the UEBA tag is applied only when the event is specifically tied to the user "jsmith", which is required for accurate behavioral analytics.
NEW QUESTION # 33
Refer to the exhibit.
Which section contains the subpattern configuration that determines how many matching events are needed to trigger the rule?
- A. Filters
- B. Actions
- C. Aggregate
- D. Group By
Answer: C
Explanation:
The Aggregate section contains the condition COUNT(Matched Events) >= 1, which defines how many events must match the filter criteria for the rule to trigger. This is the subpattern configuration that determines the event threshold.
NEW QUESTION # 34
Refer to the exhibit.
A FortiSIEM device is receiving syslog events from a FortiGate firewall. The FortiSIEM analyst is trying to search the raw event logs for the last two hours that contain the keyword "udp".
However, they are getting no results from the search, which they know should be available.
Based on the filter shown in the exhibit, why are there no search results?
- A. The Time Range value should be set to Real-Time.
- B. The analyst selected AND in the Next column. This is the wrong Boolean operator.
- C. The keyword is case sensitive. Instead of typing udp in the Value field, the analyst should type UDP.
- D. The analyst selected = in the Operator column. That is the wrong operator.
Answer: D
Explanation:
The operator is set to "=", which performs an exact match on the entire raw event log, not a substring search. To find logs that contain the keyword "udp", the analyst should use the CONTAIN operator instead. This will return all logs where "udp" appears anywhere in the raw log message.
NEW QUESTION # 35
......
Use Valid Exam FCP_FSM_AN-7.2 by ITPassLeader Books For Free Website: https://troytec.itpassleader.com/Fortinet/FCP_FSM_AN-7.2-dumps-pass-exam.html