HPE6-A81 Exam Dumps - Try Best HPE6-A81 Exam Questions from Training Expert ITPassLeader
Practice Examples and Dumps & Tips for 2022 Latest HPE6-A81 Valid Tests Dumps
NEW QUESTION 25
Refer to the exhibit.
A customer has configured Onboard in a cluster. After the Primary server's failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting'
- A. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
- B. Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server's hostname.
- C. Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.
- D. Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).
Answer: B
NEW QUESTION 26
Refer to the exhibit.
You have set up a home lab for ACCX exam preparation with Aruba Clear Pass integrated with Aruba Controller and Instant Access Point Guest Mac Caching functionality is configured only for Aruba Controller's guest SSID and a common Web Login page is configured for both NAD devices You tested and verified the mac caching functionality for a client by connecting it to the Aruba Controller's guest SSID.
What will happen when you disconnect the client from Aruba Controller's guest SSID and connect it to Instant APs guest SSID?
- A. The client will fail the mac authentication and will be redirected to the captive portal page.
- B. The client does not have to complete any authentication as the re-connection was immediate.
- C. The client will bypass the captive portal authentication by completing the MAC authentication.
- D. The client will be redirected to the captive portal page to complete the web authentication.
Answer: C
NEW QUESTION 27
Refer to the exhibit.
A customer has configured Onboard in his lab ClearPass server and Windows devices work as expected but cannot get the Apple iOS devices to Onboard successfully Where would you look to troubleshoot the issue? {Select two)
- A. Check if the customer has installed a custom HTTPS certificate for iOS and another internal PKI HTTPS certificate for other devices.
- B. Check if the ClearPass HTTPS server certificate installed in the server is issued by a trusted commercial certificate authority.
- C. Check if the customer installed the internal PKI Root certificate presented by the ClearPass during the provisioning process.
- D. Check if the customer has installed the same internal PKI signed RADIUS server certificate as the HTTPS server certificate.
- E. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
Answer: B,E
NEW QUESTION 28
There is an Aruba Controller configured to stand Guest AAA requests to ClearPass If the customer would likt tht most effective way to ensure the lowest license usage counts, how should the controller be configured?
- A. Aruba Controller will send stop messages only if both accounting and Interim accounting are enabled.
- B. Aruba Controller will send stop messages if RADIUS Accounting Server Group is defined in the authentication profile.
- C. Configure EAP Termination on the Aruba Controller and the client will send a stop message.
- D. Aruba Controller will send stop messages only if EAP termination and Interim accounting are enabled.
Answer: B
NEW QUESTION 29
Refer to the exhibit.
A customer is trying to configure a TACACS Authentication Service for administrative what could be the reason for the Login Status REJECT?
- A. The Read-only Administrator role does not exist on the Controller.
- B. The Enforcement profile used is not a TACACS profile.
- C. The password used by the administrative user is wrong.
- D. The Enforcement profile is not designed to be used on Aruba Controller
Answer: A
NEW QUESTION 30
A corporate Clear Pass Cluster with two servers located at a single site, has both Management and Data port IP addresses configured. The Management port IPs art in the DataCenter networks subnet, while the Data port IPs are in the DMZ. What is the difference between using one Virtual IP for the AAA traffic versus sending AAA requests to the physical IPs for each server' (Select two.)
- A. One Virtual IP can be used together with the individual server IPs for load balancing.
- B. By using the Virtual IP, the failover wait time is faster than using individual server IPs.
- C. The failover can be accomplished only by using Virtual IP
- D. The Individual IPs can provide failover and load balancing.
- E. Using the one Virtual IP can provide failover.
Answer: B,E
NEW QUESTION 31
A customer has acquired another company that has its own Active Directory infrastructure. The 802 1X PEAP authentication works with the customer's original Active Directory servers but the customer would like to authenticate users from the acquired company as well.
What steps are required, in regards to the Authentication Sources, in order to support this request? (Select two.)
- A. Create a new Authentication Source, type Active Directory.
- B. Add the new AD server(s) as backup into the existing Authentication Source.
- C. Create a new Authentication Source, type Generic LDAP.
- D. Join the ClearPass server(s) to the new AD domain.
- E. There is no need to join ClearPass to the new AD domain.
Answer: C,E
NEW QUESTION 32
Refer to the exhibit.
What could be causing the error message received on the OnGuard client?
- A. There is a firewall policy not allowing the OnGuard Agent to connect to ClearPass
- B. The client's OnGuard Agent has not been configured with the correct Policy Manager Zone.
- C. The Health-Check service does not have Posture Compliance option enabled
- D. The Service Selection Rules for the service are not configured correctly
Answer: D
NEW QUESTION 33
Refer to the exhibit.
Your customer has configured the 802.1 X service enforcement conditions with the Endpoint profiling dat a. When the client connects to the network. ClearPass successfully profiles the client but the client always receives an incorrect enforcement profile The configurations in the Aruba controller are completed correctly What is the cause of the issue?
- A. The enforcement policy conditions configured with profiling data are not correct
- B. The option, use cached roles and posture from previous sessions should be enabled.
- C. The enforcement policy rules evaluation algorithm is not configured correctly.
- D. An additional authorization source should be configured for profiling to work.
Answer: B
NEW QUESTION 34
Refer to the exhibit.
A customer has configured Onboard in a cluster with two nodes. All devices were onboarded in the network through node1 but those clients fail to authenticate through node2 with the error shown What steps would you suggest to make provisioning and authentication work across the entire cluster? (Select three)
- A. Configure the Network Settings in Onboard to trust the Policy Manager EAP certificate.
- B. Have all of the BYOO clients disconnect and reconnect to the network.
- C. Make sure that the EAP certificates on both nodes are issued by one common root Certificate Authority (CA).
- D. Configure the Onboard Root CA to trust the Policy Manager EAP certificate root.
Answer: B,C,D
NEW QUESTION 35
Which statements art true about the Database server certificate? (Select two)
- A. A change in Database certificate will only be applicable after a reboot of the node
- B. Database certificate can be created to take a secure backup of the ClearPass database.
- C. Database server certificate is optional for the ClearPass servers that are part of a Cluster.
- D. ClearPass Policy Manager nodes validates the Database certificate while joining the cluster
- E. Custom Database certificate requires Subject Alternative Name (SAN) field with the DNS name of the server.
Answer: D,E
NEW QUESTION 36
Refer to the exhibit.
A customer it troubleshooting a client not getting the SHV posture updated and the OnGuard agent shows the Health Status Not Known. What could the user do to update the health status?
- A. modify the agent.conf file and add the WIRED interface to it
- B. change the Policy Manager Zone mapping and add the WIRED interface range
- C. reinstall the OnGuard agent from the Wired interface
- D. connect using an interface that is configured as Managed Interface
Answer: A
NEW QUESTION 37
What is used to validate the EAP Certificate? (Select two.)
- A. SAN entries
- B. Date
- C. Key usage
- D. Server Identity
- E. Common Name
Answer: A,C
NEW QUESTION 38
The customer has configured the guest self-registration with sponsor approval. The guest users that the sponsor email and the other requested details while registering the account but the users were able to complete the authentication and access the internet without the sponsor's approval.
What configuration settings will you check to make this setup work?
- A. Check if sponsor name field is enabled in the register form page
- B. Check if authentication option n is enabled in the self-registration page enabled.
- C. Check if sponsor email field is enabled in the register form page
- D. Check if sponsor confirmation is enabled in the self-registration page
Answer: C
NEW QUESTION 39
A customer has created a Guest Self-Registration page that they would like to use it as 'template' for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page.
What should be configured in order to accomplish this request?
- A. Save this "template" page as a new Skin to be used on other Self-Registration pages.
- B. Create child pages when creating new Self-Registration pages and select the "template" as Parent.
- C. Copy the "template" page and edit it each time a new Self-Registration Page is needed.
- D. Save the "template" page as Master Self'Registration page.
Answer: D
NEW QUESTION 40
The customer has a 19.940 loT devices connected to the network and would like to use Allow All Mac Auth to authenticate the users and enforce the action based on the condition defined with the fingerprint details of the device. Which Authorization source would you use to decide the access of the devices?
- A. Guest Device Database
- B. Clear Pass Profiler Database
- C. Endpoint Database
- D. Local User Database
Answer: A
NEW QUESTION 41
......
HP HPE6-A81 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Latest 100% Passing Guarantee - Brilliant HPE6-A81 Exam Questions PDF: https://troytec.itpassleader.com/HP/HPE6-A81-dumps-pass-exam.html