[Nov-2024] D-PDD-DY-23 PDF Dumps Extremely Quick Way Of Preparation
Download D-PDD-DY-23 Dumps (2024) - Free PDF Exam Demo
NEW QUESTION # 61
Which port is used by default on a PowerProtect DD to listen for CIFS clients?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 62
What are valid states for the DD VTL process?
- A. Disabled, Jammed, Starting, and Timed out
- B. Running, Starting, Stopping, and Stuck
- C. Stopped, Disabled, Running, and Starting
Answer: B
NEW QUESTION # 63
What is the primary role of the media server in Veritas NetBackup and Backup Exec environments?
- A. Monitoring backup data.
- B. Write to and read from backup targets.
- C. Writes metadata to backup targets.
- D. Creating backup policies.
Answer: B
NEW QUESTION # 64
An organization uses tape libraries in their current backup infrastructure. They have purchased a PowerProtect DD system and plan to use VTL to move from tape.
What is a consideration when configuring the tape size?
- A. Target single drives to write multiple streams
- B. Target multiple drives to write single stream
- C. Set retention periods for as long as possible
- D. Use smaller tapes for smaller datasets
Answer: D
NEW QUESTION # 65
A systems administrator wants to change encryption.
Which user role is needed to log in, and what command must be run to enable the security policy?
- A. security officer user and run authentication policy set security-officer enabled
- B. security officer user and run authorization policy set security-officer enabled
- C. sysadmin user and run authentication policy set security-officer enabled
- D. sysadmin user and run authorization policy set security-officer enabled
Answer: B
NEW QUESTION # 66
What is a requirement to configure the PowerProtect DD tape out to cloud feature?
- A. Two cloud units
- B. DD VTL License
- C. Tape Out to Cloud License
- D. Cloud Profile
Answer: B
NEW QUESTION # 67
A customer has stored the data that is in the cloud using PowerProtect DD. For security reasons, encryption will be applied to the data.
What is the required action to achieve the customer's goal?
- A. Enable the encryption via cloud tier level
- B. Turn off encryption and reenable
- C. Encrypt and reupload the data
- D. Activate the Data at Rest encryption
Answer: C
NEW QUESTION # 68
Which command is used to start the initial CLI configuration wizard?
- A. setup
- B. config setup
- C. config
- D. install config
Answer: B
NEW QUESTION # 69
What is the maximum number of CIFS shares that the PowerProtect DD system supports?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 70
What is the correct sequence of operations used by the PowerProtect DD DIA in the end-to-end verification process?
Answer:
Explanation:
NEW QUESTION # 71
Which command displays the RAID group information for the active tier of each shelf?
- A. raid show all
- B. storage show all
- C. raid show info
- D. filesys show info
Answer: B
NEW QUESTION # 72
What are the login credentials for the default iDRAC user on a new PowerProtect DD appliance?
- A. root/system serial number
- B. sysadmin/changeme
- C. root/calvin
- D. sysadmin/system serial number
Answer: A
NEW QUESTION # 73
When using the DD VTL Tape Out to Cloud feature, which status will the tape report on the backup server once the tape is ready for long-term retention?
- A. Nonmountable
- B. Archived
- C. Offsite
- D. Mountable
Answer: A
NEW QUESTION # 74
Which two applications use the client direct feature? (Select 2)
- A. Avamar
- B. Dell NetWorker
- C. IBM Spectrum Protect
- D. Veritas Backup Exec
Answer: A,B
NEW QUESTION # 75
A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained.
Which PowerProtect DD systems meet the customer's requirement?
- A. DD3300, DD6900, and DD9400
- B. DDVE, DD3300, and DD6900
- C. DD9400, DDVE, and DD9900
- D. DD6900, DDVE, and DD9400
Answer: A
NEW QUESTION # 76
What is the Backup Data packet flow from the Amavar Client to the PowerProtect DD appliance?
- A. Through the Storage Node and then to PowerProtect DD
- B. Through the Amavar Data Store and then to PowerProtect DD
- C. Direct from the client to PowerProtect DD
- D. Through the Amavar Server and then to PowerProtect DD
Answer: C
NEW QUESTION # 77
An IBM Spectrum Protect administrator is configuring a device class with PowerProtect DD.
Following best practices, what is the recommended device type and mount limit?
- A. DISK, 2
- B. DISK, 20
- C. FILE, 20
- D. FILE, 2
Answer: C
NEW QUESTION # 78
Which port/protocol is used when using a syslog server to monitor a PowerProtect DD system?
- A. 514/UDP
- B. 2051/TCP
- C. 514/TCP
- D. 2051/UDP
Answer: A
NEW QUESTION # 79
What is a requirement to use the PowerProtect DD HA feature?
- A. Head units and nodes require an active/active configuration
- B. A single set of shared storage
- C. Each head unit requires its own FS25 shelf
- D. Dual set of shared storage configuration
Answer: D
NEW QUESTION # 80
A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB. The initial backup requires 400 GB with a 10 percent increase in the data each day.
Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB.
What is the weekly burn rate (GB) after six daily incremental backups and one weekly backup?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 81
An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible.
What is the most likely cause of this behavior?
- A. Filesystem is disabled on source system.
- B. Migration will restrict all activities on both systems.
- C. Migration will restrict all activities on source systems.
- D. Source system is running in restricted mode.
Answer: C
NEW QUESTION # 82
What are the settings for serial communication when connecting to a PowerProtect DD appliance?
- A. 115200, 8, 1, none, Xon/Xoff, and vt-100
- B. 57600, 8, 1, none, none, and vt-100
- C. 57600, 8, 1, none, Xon/Xoff, and vt-100
- D. 115200, 8, 1, none, none, and vt-100
Answer: D
NEW QUESTION # 83
A customer requires a backup for their daily operational data. They do not back up directly to the PowerProtect DD appliance using Avamar backup software.
What will be the result of the backup process?
- A. Backup server will preserve the data on the PowerProtect DD appliance
- B. Backup file will be available on cloud tier
- C. Backup process will be using post dedupe technology
- D. Data will be unable to restore locally
Answer: A
NEW QUESTION # 84
When accessing an NFS share from a PowerProtect DD appliance, what is the maximum Mount Limit value for restore instances recommended by IBM Spectrum Protect?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 85
......
Enhance your career with D-PDD-DY-23 PDF Dumps - True EMC Exam Questions: https://troytec.itpassleader.com/EMC/D-PDD-DY-23-dumps-pass-exam.html